[ 15.124] X.Org X Server 1.21.1.21 X Protocol Version 11, Revision 0 [ 15.124] Current Operating System: Linux host-156 6.12.63-6.12-alt1 #1 SMP PREEMPT_DYNAMIC Thu Dec 18 15:21:10 UTC 2025 x86_64 [ 15.124] Kernel command line: BOOT_IMAGE=/boot/vmlinuz fastboot live root=bootchain bootchain=fg,altboot automatic=method:disk,uuid:2026-01-22-20-17-40-00 stagename=live systemd.unit=install2.target ramdisk_size=2413089 lowmem usbcore.autosuspend=-1 quiet loglevel=3 splash mce=off lang=ru_RU [ 15.124] [ 15.124] Current version of pixman: 0.46.4 [ 15.124] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 15.124] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 15.124] (++) Log file: "/tmp/x11.log", Time: Thu Jan 22 20:33:57 2026 [ 15.125] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 15.125] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 15.132] (==) No Layout section. Using the first Screen section. [ 15.132] (==) No screen section available. Using defaults. [ 15.132] (**) |-->Screen "Default Screen Section" (0) [ 15.132] (**) | |-->Monitor "" [ 15.133] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 15.133] (**) Allowing byte-swapped clients [ 15.133] (==) Automatically adding devices [ 15.133] (==) Automatically enabling devices [ 15.133] (==) Automatically adding GPU devices [ 15.133] (==) Automatically binding GPU devices [ 15.133] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 15.133] (==) FontPath set to: catalogue:/etc/X11/fontpath.d [ 15.133] (==) ModulePath set to "/usr/lib64/X11/modules" [ 15.133] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 15.133] (II) Loader magic: 0x55f1abda3020 [ 15.133] (II) Module ABI versions: [ 15.133] X.Org ANSI C Emulation: 0.4 [ 15.133] X.Org Video Driver: 25.2 [ 15.133] X.Org XInput driver : 24.4 [ 15.133] X.Org Server Extension : 10.0 [ 15.133] (++) using VT number 7 [ 15.133] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 15.134] (II) xfree86: Adding drm device (/dev/dri/card1) [ 15.134] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/drm/card1 [ 15.134] (DB) /dev/dri/card1 has 4 connectors [ 15.139] (--) PCI:*(0@0:1:0) 1b36:0100:1af4:1100 rev 5, Mem @ 0x80000000/268435456, 0x90000000/134217728, 0x99244000/8192, I/O @ 0x00008120/32, BIOS @ 0x????????/131072 [ 15.139] (II) LoadModule: "glx" [ 15.139] (II) Loading /usr/lib64/X11/modules/extensions/libglx.so [ 15.183] (II) Module glx: vendor="X.Org Foundation" [ 15.183] compiled for 1.21.1.21, module version = 1.0.0 [ 15.183] ABI class: X.Org Server Extension, version 10.0 [ 15.183] (==) Matched qxl as autoconfigured driver 0 [ 15.183] (==) Matched modesetting as autoconfigured driver 1 [ 15.183] (==) Matched fbdev as autoconfigured driver 2 [ 15.183] (==) Matched vesa as autoconfigured driver 3 [ 15.183] (==) Assigned the driver to the xf86ConfigLayout [ 15.183] (II) LoadModule: "qxl" [ 15.184] (II) Loading /usr/lib64/X11/modules/drivers/qxl_drv.so [ 15.194] (II) Module qxl: vendor="X.Org Foundation" [ 15.194] compiled for 1.21.1.6, module version = 0.1.6 [ 15.194] Module class: X.Org Video Driver [ 15.194] ABI class: X.Org Video Driver, version 25.2 [ 15.194] (II) LoadModule: "modesetting" [ 15.194] (II) Loading /usr/lib64/X11/modules/drivers/modesetting_drv.so [ 15.202] (II) Module modesetting: vendor="X.Org Foundation" [ 15.202] compiled for 1.21.1.21, module version = 1.21.1 [ 15.202] Module class: X.Org Video Driver [ 15.202] ABI class: X.Org Video Driver, version 25.2 [ 15.202] (II) LoadModule: "fbdev" [ 15.202] (II) Loading /usr/lib64/X11/modules/drivers/fbdev_drv.so [ 15.208] (II) Module fbdev: vendor="X.Org Foundation" [ 15.208] compiled for 1.21.1.14, module version = 0.5.1 [ 15.208] Module class: X.Org Video Driver [ 15.208] ABI class: X.Org Video Driver, version 25.2 [ 15.208] (II) LoadModule: "vesa" [ 15.208] (II) Loading /usr/lib64/X11/modules/drivers/vesa_drv.so [ 15.214] (II) Module vesa: vendor="X.Org Foundation" [ 15.214] compiled for 1.21.1.3, module version = 2.5.0 [ 15.214] Module class: X.Org Video Driver [ 15.214] ABI class: X.Org Video Driver, version 25.2 [ 15.214] (II) qxl: Driver for QXL virtual graphics: QXL 1 [ 15.214] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 15.214] (II) FBDEV: driver for framebuffer: fbdev [ 15.214] (II) VESA: driver for VESA chipsets: vesa [ 15.216] (II) [KMS] Kernel modesetting enabled. [ 15.216] (WW) Falling back to old probe method for modesetting [ 15.216] (EE) open /dev/dri/card0: No such file or directory [ 15.216] (WW) Falling back to old probe method for fbdev [ 15.216] (II) Loading sub module "fbdevhw" [ 15.216] (II) LoadModule: "fbdevhw" [ 15.217] (II) Loading /usr/lib64/X11/modules/libfbdevhw.so [ 15.225] (II) Module fbdevhw: vendor="X.Org Foundation" [ 15.225] compiled for 1.21.1.21, module version = 0.0.2 [ 15.225] ABI class: X.Org Video Driver, version 25.2 [ 15.229] (II) qxl(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 15.229] (==) qxl(0): Depth 24, (--) framebuffer bpp 32 [ 15.229] (==) qxl(0): RGB weight 888 [ 15.229] (==) qxl(0): Default visual is TrueColor [ 15.229] (==) qxl(0): Using gamma correction (1.0, 1.0, 1.0) [ 15.229] (II) qxl(0): QXL_NUM_HEADS not configured, defaulting to 1 [ 15.229] (II) qxl(0): Deferred Frames: Disabled [ 15.229] (II) qxl(0): Offscreen Surfaces: Disabled [ 15.229] (II) qxl(0): Image Cache: Disabled [ 15.229] (II) qxl(0): Fallback Cache: Disabled [ 15.229] (==) qxl(0): DPI set to (96, 96) [ 15.229] (II) Loading sub module "fb" [ 15.229] (II) LoadModule: "fb" [ 15.229] (II) Module "fb" already built-in [ 15.229] (II) Loading sub module "ramdac" [ 15.229] (II) LoadModule: "ramdac" [ 15.229] (II) Module "ramdac" already built-in [ 15.230] (II) qxl(0): Output Virtual-1 has no monitor section [ 15.230] (II) qxl(0): Output Virtual-2 has no monitor section [ 15.230] (II) qxl(0): Output Virtual-3 has no monitor section [ 15.230] (II) qxl(0): Output Virtual-4 has no monitor section [ 15.230] (II) qxl(0): EDID for output Virtual-1 [ 15.230] (II) qxl(0): Printing probed modes for output Virtual-1 [ 15.230] (II) qxl(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP) [ 15.230] (II) qxl(0): Modeline "4096x2160"x60.0 556.74 4096 4104 4136 4176 2160 2208 2216 2222 +hsync -vsync (133.3 kHz e) [ 15.230] (II) qxl(0): Modeline "4096x2160"x59.9 556.19 4096 4104 4136 4176 2160 2208 2216 2222 +hsync -vsync (133.2 kHz e) [ 15.230] (II) qxl(0): Modeline "2560x1600"x60.0 348.50 2560 2752 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz e) [ 15.230] (II) qxl(0): Modeline "2560x1600"x60.0 268.50 2560 2608 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.7 kHz e) [ 15.230] (II) qxl(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e) [ 15.230] (II) qxl(0): Modeline "1856x1392"x60.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e) [ 15.230] (II) qxl(0): Modeline "1792x1344"x60.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e) [ 15.230] (II) qxl(0): Modeline "2048x1152"x60.0 162.00 2048 2074 2154 2250 1152 1153 1156 1200 +hsync +vsync (72.0 kHz e) [ 15.230] (II) qxl(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e) [ 15.230] (II) qxl(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e) [ 15.230] (II) qxl(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 15.230] (II) qxl(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 15.230] (II) qxl(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 15.230] (II) qxl(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 15.230] (II) qxl(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e) [ 15.230] (II) qxl(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e) [ 15.230] (II) qxl(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e) [ 15.230] (II) qxl(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 15.230] (II) qxl(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 15.230] (II) qxl(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 15.230] (II) qxl(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 15.230] (II) qxl(0): Modeline "1280x854"x60.0 89.34 1280 1352 1480 1680 854 857 867 887 -hsync +vsync (53.2 kHz) [ 15.230] (II) qxl(0): Modeline "1366x768"x59.8 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz e) [ 15.230] (II) qxl(0): Modeline "1366x768"x60.0 72.00 1366 1380 1436 1500 768 769 772 800 +hsync +vsync (48.0 kHz e) [ 15.230] (II) qxl(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e) [ 15.230] (II) qxl(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e) [ 15.230] (II) qxl(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 15.230] (II) qxl(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 15.230] (II) qxl(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e) [ 15.230] (II) qxl(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 15.230] (II) qxl(0): Modeline "1152x768"x59.9 71.95 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.8 kHz) [ 15.230] (II) qxl(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 15.230] (II) qxl(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 15.230] (II) qxl(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e) [ 15.230] (II) qxl(0): Modeline "720x480"x59.9 26.85 720 744 808 896 480 483 493 500 -hsync +vsync (30.0 kHz) [ 15.230] (II) qxl(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 15.230] (II) qxl(0): EDID for output Virtual-2 [ 15.230] (II) qxl(0): EDID for output Virtual-3 [ 15.230] (II) qxl(0): EDID for output Virtual-4 [ 15.230] (II) qxl(0): Output Virtual-1 connected [ 15.230] (II) qxl(0): Output Virtual-2 disconnected [ 15.230] (II) qxl(0): Output Virtual-3 disconnected [ 15.230] (II) qxl(0): Output Virtual-4 disconnected [ 15.230] (II) qxl(0): Using exact sizes for initial modes [ 15.230] (II) qxl(0): Output Virtual-1 using initial mode 1024x768 +0+0 [ 15.230] (II) qxl(0): PreInit complete [ 15.230] (II) UnloadModule: "modesetting" [ 15.230] (II) Unloading modesetting [ 15.230] (II) UnloadModule: "fbdev" [ 15.230] (II) Unloading fbdev [ 15.230] (II) UnloadSubModule: "fbdevhw" [ 15.230] (II) Unloading fbdevhw [ 15.230] (II) UnloadModule: "vesa" [ 15.230] (II) Unloading vesa [ 15.238] (II) UXA(0): Driver registered support for the following operations: [ 15.238] (II) solid [ 15.238] (II) copy [ 15.238] (II) composite (RENDER acceleration) [ 15.238] (II) put_image [ 15.238] resizing primary to 1024x768 [ 15.243] primary is 0x55f1bcf53f10 [ 15.351] (II) Initializing extension Generic Event Extension [ 15.351] (II) Initializing extension SHAPE [ 15.351] (II) Initializing extension MIT-SHM [ 15.351] (II) Initializing extension XInputExtension [ 15.351] (II) Initializing extension XTEST [ 15.351] (II) Initializing extension BIG-REQUESTS [ 15.351] (II) Initializing extension SYNC [ 15.351] (II) Initializing extension XKEYBOARD [ 15.351] (II) Initializing extension XC-MISC [ 15.351] (II) Initializing extension SECURITY [ 15.351] (II) Initializing extension XFIXES [ 15.351] (II) Initializing extension RENDER [ 15.351] (II) Initializing extension RANDR [ 15.351] (II) Initializing extension COMPOSITE [ 15.352] (II) Initializing extension DAMAGE [ 15.352] (II) Initializing extension MIT-SCREEN-SAVER [ 15.352] (II) Initializing extension DOUBLE-BUFFER [ 15.352] (II) Initializing extension RECORD [ 15.352] (II) Initializing extension DPMS [ 15.352] (II) Initializing extension Present [ 15.352] (II) Initializing extension DRI3 [ 15.352] (II) Initializing extension X-Resource [ 15.352] (II) Initializing extension XVideo [ 15.352] (II) Initializing extension XVideo-MotionCompensation [ 15.352] (II) Initializing extension SELinux [ 15.352] (II) SELinux: Disabled on system [ 15.352] (II) Initializing extension GLX [ 15.352] (II) AIGLX: Screen 0 is not DRI2 capable [ 16.955] (II) IGLX: Loaded and initialized swrast [ 16.955] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 16.955] (II) Initializing extension XFree86-VidModeExtension [ 16.955] (II) Initializing extension XFree86-DGA [ 16.955] (II) Initializing extension XFree86-DRI [ 16.955] (II) Initializing extension DRI2 [ 16.955] (II) qxl(0): Setting screen physical size to 270 x 203 [ 17.093] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 17.093] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 17.093] (**) Power Button: Applying InputClass "system-keyboard" [ 17.093] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 17.093] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 17.093] (**) Power Button: Applying InputClass "keyboard" [ 17.093] (II) LoadModule: "evdev" [ 17.093] (II) Loading /usr/lib64/X11/modules/input/evdev_drv.so [ 17.105] (II) Module evdev: vendor="X.Org Foundation" [ 17.105] compiled for 1.21.1.13, module version = 2.11.0 [ 17.105] Module class: X.Org XInput Driver [ 17.105] ABI class: X.Org XInput driver, version 24.4 [ 17.105] (II) Using input driver 'evdev' for 'Power Button' [ 17.106] (**) Power Button: always reports core events [ 17.106] (**) evdev: Power Button: Device: "/dev/input/event1" [ 17.106] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 17.106] (--) evdev: Power Button: Found keys [ 17.106] (II) evdev: Power Button: Configuring as keyboard [ 17.106] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event1" [ 17.106] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 17.106] (**) Option "xkb_rules" "evdev" [ 17.106] (**) Option "xkb_layout" "us,ru" [ 17.106] (**) Option "xkb_options" "grp:alt_shift_toggle" [ 17.125] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 17.125] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 17.125] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [ 17.125] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 17.125] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 17.125] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard" [ 17.125] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 17.125] (**) AT Translated Set 2 keyboard: always reports core events [ 17.125] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 17.125] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 17.125] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 17.125] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 17.125] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 17.125] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 7) [ 17.125] (**) Option "xkb_rules" "evdev" [ 17.125] (**) Option "xkb_layout" "us,ru" [ 17.125] (**) Option "xkb_options" "grp:alt_shift_toggle" [ 17.125] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event3) [ 17.125] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "evdev pointer catchall" [ 17.125] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "evdev pointer catchall" [ 17.125] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" [ 17.125] (II) LoadModule: "libinput" [ 17.125] (II) Loading /usr/lib64/X11/modules/input/libinput_drv.so [ 17.147] (II) Module libinput: vendor="X.Org Foundation" [ 17.147] compiled for 1.21.1.13, module version = 1.5.0 [ 17.147] Module class: X.Org XInput Driver [ 17.147] ABI class: X.Org XInput driver, version 24.4 [ 17.147] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' [ 17.147] (**) VirtualPS/2 VMware VMMouse: always reports core events [ 17.147] (**) Option "Device" "/dev/input/event3" [ 17.154] (II) event3 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 17.154] (II) event3 - VirtualPS/2 VMware VMMouse: emulating high-resolution scroll wheel events. [ 17.154] (II) event3 - VirtualPS/2 VMware VMMouse: device is a pointer [ 17.155] (II) event3 - VirtualPS/2 VMware VMMouse: device removed [ 17.182] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 17.182] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 17.182] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 17.182] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event3" [ 17.182] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 8) [ 17.182] (**) Option "AccelerationScheme" "none" [ 17.182] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 [ 17.182] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 [ 17.182] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 [ 17.183] (II) event3 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 17.183] (II) event3 - VirtualPS/2 VMware VMMouse: emulating high-resolution scroll wheel events. [ 17.183] (II) event3 - VirtualPS/2 VMware VMMouse: device is a pointer [ 17.183] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse1) [ 17.183] (II) No input driver specified, ignoring this device. [ 17.183] (II) This device may have been added with another device file. [ 17.183] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event2) [ 17.183] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "evdev pointer catchall" [ 17.183] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "evdev pointer catchall" [ 17.183] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" [ 17.183] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' [ 17.183] (**) VirtualPS/2 VMware VMMouse: always reports core events [ 17.183] (**) Option "Device" "/dev/input/event2" [ 17.184] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 17.184] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer [ 17.184] (II) event2 - VirtualPS/2 VMware VMMouse: device removed [ 17.210] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event2" [ 17.210] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 9) [ 17.210] (**) Option "AccelerationScheme" "none" [ 17.210] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 [ 17.210] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 [ 17.210] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 [ 17.210] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 17.211] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer [ 17.211] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse0) [ 17.211] (II) No input driver specified, ignoring this device. [ 17.211] (II) This device may have been added with another device file. [ 405.793] (II) event3 - VirtualPS/2 VMware VMMouse: device removed [ 405.817] (II) event2 - VirtualPS/2 VMware VMMouse: device removed [ 405.847] (II) UnloadModule: "libinput" [ 405.847] (II) UnloadModule: "libinput" [ 405.847] (II) evdev: AT Translated Set 2 keyboard: Close [ 405.847] (II) UnloadModule: "evdev" [ 405.847] (II) evdev: Power Button: Close [ 405.847] (II) UnloadModule: "evdev" [ 405.877] (II) Server terminated successfully (0). Closing log file.